Precision Power | PC1800.1D Amplifier
$519.00
PowerClass Vertical Subwoofer Amplifier
| RMS Power 4Ω | 500W x 1 (14.4V, 35Hz, ≤ 1% THD+N) |
| RMS Power 2Ω | 1,000W x 1 (14.4V, 35Hz, ≤ 1% THD+N) |
| RMS Power 1Ω | 1,800W x 1 (14.4V, 35Hz, ≤ 1% THD+N) |
- Power Class Series Class D 1 ohms Stable Monoblock Amplifier
- RMS Power Rating:
- 4 ohms: 500 watts x 1 channel
- 2 ohms: 1000 watts x 1 channel
- 1 ohm: 1800 watts x 1 channel
- Total RMS power output: 1800 watts
- N-Channel MOSFET transistors from Sanken® of Japan
- Sequenced delays eliminate power-up/power-down pops
- Output stage bias individually sequenced
- Close tolerance signal path components <1% wima® of Germany
- Full signal path low noise/distortion circuitry topology
- Extra low current drive stage increases efficiency & sound clarity
- Stout 2 oz. Copper traces
- Differential rca inputs isolate 12v/audio to ground
- Individually regulated preamp/crossover power supply ensures signal purity
- LED Power/Protect Light
- Dash-mount wired remote bass level control included
- Soft start turn-on
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Frequency Response: 17 – 300 Hz
- Total Harmonic Distortion (THD): 0.05%
- Signal to Noise Ratio: 90 dB
- Variable low-pass filter: 32 – 300 Hz
- Subsonic filter: 17 – 50 Hz
- Variable Bass Boost: 0 – 12 dB
- 1/0 AWG gauge power and ground wiring is recommended for installation.
- Dimensions: 3.25″ W x 17.75″ L x 8″ H
| Weight | 14.5 lbs |
|---|---|
| Dimensions | 20.5 × 11 × 4.5 in |