Multi-Zone 12 Channel Amplifier 60WPC
$1,034.99
Quick Overview
The Dayton Audio MA1260 is a freestanding, twelve channel, Class-D amplifier designed for custom multi-room sound distribution. Its intelligently engineered and versatile design integrates easily into high-end whole house audio systems.
Product Highlights
- 12 channels (6 stereo zones) in one convenient enclosure
- Efficient Class D design delivers superior audiophile sound quality and performance
- Independent and bus inputs provides unparalleled flexibility
- Bridgeable channel outputs provide additional power when needed
- Independent channel gain controls allow the output of each speaker to be perfectly matched
- Can be converted easily between rack-mount and tabletop configurations
- Installer-friendly setup and connections
Product Manuals / Spec Sheets / Downloads
Dayton Audio MA1260 User Manual
Dayton Audio MA1260 Set-Up Addendum Using In-Wall Volume Controls
Dayton Audio MA1260 Architectural & Engineering Specification Sheet
- Specifications:
- Rated power output per channel: 65 watts RMS into 8 ohms, 89 watts RMS into 4 ohms
- Bridged output: 130 watts into 8 ohms (8 ohm minimum)
- Circuit topology: Class D
- Signal to noise ratio: 100 dB A-weighted
- Efficiency: 93%
- Frequency response: 7.5 Hz to 48 kHz
- Dimensions: 16.7″ W x 4″ H x 14.25″ D (tabletop configurations)
- Power requirements: 115/230 VAC, 50 Hz/60 Hz • Stand-by power rating: 115V 0.46W.
Product Details
| Model Number | MA1260 |
| Color | Black |
| Unit of Measure | Each |
| UPC | 848791001215 |
| Warranty – Parts | 5 Years |
| Warranty – Labor | 5 Years |
| Product Shipping Weight (lbs.) | 40 |
| Product Height | 4″ |
| Product Width | 16.7″ |
| Product Length | — |
| Product Depth | 14.25″ |
| Amplifier Type | Multi-Zone Amplifiers |
| Power Output | per channel: 65 watts RMS into 8 ohms
89 watts RMS into 4 ohms • Bridged output: 130 watts into 8 ohms (8 ohm minimum) |
| Power Output (RMS @ 70V) Range | — |
| Output Connectors | — |
| Output Types | — |
| Input Connectors | — |
| Input Impedance | 16.7K ohms |
| Signal-to-Noise Ratio | 115 dB A-Weighted (1W
line input) |
| THD @ Rated Power | 0.020% (8 ohms
1W @ 1 kHz) |
| Parametric EQ | — |
| Phase Adjustment | — |
| Low-pass Crossover | — |
| Low Pass Adjustment | — |
| Dynamic Range | — |
| Frequency Response | 7.5 – 48 Hz (+0/-3 dB) |
| Efficiency | 93% (full power) |
| Gain | — |
| Bass Boost | — |
| Voltage Requirement | — |
| Auto-on Sensitivity | 12.3mV |
| Stand-by Power Rating | 0.46 W (115V) |
| Special Features | — |