Class D Stereo 60 WPC Bluetooth Amplifier
$369.99
Quick Overview
Connect with the Dayton Audio APA102BT amplifier and enjoy the convenience of Bluetooth, auto-on, and auto-source switching technology that makes playing your favorite music a breeze. Use this affordable, versatile amp when more power is needed in a multi-zone system, or in a powerful, audiophile-grade stereo hi-fi setup.
Product Highlights
- Bluetooth 4.2 with aptX technology for wireless Hi-Fi listening
- Dual stereo RCA line level inputs switch sources automatically
- Convenient signal sensing power on and trigger modes save power when not in use
- A/B speaker selector simplifies connectivity
- 5-way binding posts on both sets of L/R speaker outputs
Product Manuals / Spec Sheets / Downloads
Dayton Audio APA102BT User Manual
Product Description
The Dayton Audio APA102BT high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Bluetooth 4.2 with aptX, two line input sources, two-channels, and Class D topology make Dayton Audios APA102BT amplifier the heavyweight in its class. The APA102BT features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the APA102BT for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.
The APA102BT is rated at 80 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety. Rack ears are included.
- Specifications:
- Output power: 2 x 60 watts RMS into 8 ohms, 2 x 80 watts RMS into 4 ohms, 1 x 160 watts RMS into 8 ohms (minimum impedance) bridged mono
- Bluetooth version: 4.2 with aptX
- Total harmonic distortion: <1.0% @ 1 kHz
- Signal to noise ratio: 88 dB, A-weighted
- Frequency response: 10-30,000 Hz
- Input sensitivity: 600 mV
- Power: 120 VAC, 60 Hz, 200 watt maximum
- Amplifier chip: TDA8950TH
- Dimensions: 16.9″ W x 7.65″ D x 2.15″ H.
Product Details
| Model Number | APA102BT |
| Color | Black |
| Unit of Measure | Each |
| UPC | 848864056234 |
| Warranty – Parts | 5 Years |
| Warranty – Labor | 5 Years |
| Product Shipping Weight (lbs.) | 6.2 |
| Product Height | 2.15″ |
| Product Width | 16.9″ |
| Product Length | — |
| Product Depth | 7.65″ |
| Amplifier Type | Power Amplifiers |
| Power Output | 2 x 60 watts RMS into 8 ohms
80 watts RMS into 4 ohms |
| Power Output (RMS @ 70V) Range | — |
| Output Channels | 2 |
| Output Connectors | 277477 |
| Output Types | 285286 |
| Inputs | 2 |
| Input Connectors | 299 |
| Input Impedance | — |
| Signal-to-Noise Ratio | 88 dB
A-weighted |
| THD @ Rated Power | <1.0% @ 1 kHz |
| Parametric EQ | — |
| Phase Adjustment | — |
| Low-pass Crossover | — |
| Low Pass Adjustment | — |
| Dynamic Range | — |
| Frequency Response | 10-30
000 Hz |
| Efficiency | — |
| Gain | — |
| Bass Boost | — |
| Voltage Requirement | 120 VAC
60 Hz |
| Auto-on Sensitivity | Yes |
| Stand-by Power Rating | — |
| Special Features | Bluetooth version: 4.2 with aptX |
| Weight | 6 lbs |
|---|---|
| Dimensions | 21 × 10 × 5 in |